1
00:00:08,760 --> 00:00:11,600
So in this video,
 I'm going to be running the hand

2
00:00:11,600 --> 00:00:14,720
from the mold that we took
 in the previous video.

3
00:00:14,720 --> 00:00:20,080
The products that I'm using are hazardous,
 so I'll need to be wearing full PPE.

4
00:00:20,080 --> 00:00:24,160
I'm going to be wearing eye protection,
 a respirator suit and gloves.

5
00:00:28,440 --> 00:00:31,400
So I've got my scales, I'm using P.T.

6
00:00:31,400 --> 00:00:36,680
Flex Rubber so I'm just decanting
 this first, so it's easier to measure out.

7
00:00:36,680 --> 00:00:42,840
This product is equal parts A
 and B, and I'm mixing a 60 grams of the A

8
00:00:42,840 --> 00:00:45,640
60 grams of the B. 

9
00:00:55,880 --> 00:01:02,200
P.T Flex has a kind of beigy flesh
 tone to it already, so I've just added

10
00:01:02,200 --> 00:01:06,520
a little bit of red flocking in there
 to create a more pinky flesh tone,

11
00:01:11,000 --> 00:01:14,920
just make sure it's
 all mixed well together.

12
00:01:20,720 --> 00:01:25,560
And then I'm just pouring in the PT flex

13
00:01:32,840 --> 00:01:34,720
and then I'm going to rotate 

14
00:01:34,720 --> 00:01:41,760
around the entire mold.

15
00:01:41,760 --> 00:01:56,120
Once I'm happy, I've covered
 all the areas, P.T.

16
00:01:56,120 --> 00:01:59,120
Flex does cure up quite quickly,

17
00:01:59,120 --> 00:02:05,640
so once it's thickening up,
 I'm just going to then leave it to cure.

18
00:02:05,640 --> 00:02:09,600
So the next step is I'm going
 to fill the hand with foam,

19
00:02:09,600 --> 00:02:15,800
this is a polyurethane foam I'm using this
 because it keeps the costs down, rather

20
00:02:15,800 --> 00:02:21,000
than filling the whole hand with PT flex
 and also keeps the hand lighter as well.

21
00:02:21,000 --> 00:02:24,800
I'm just going to shake the bottles
 just before I decant them.

22
00:02:29,040 --> 00:02:31,680
And again, I'm decanting
 the A and B first,

23
00:02:31,680 --> 00:02:34,680
just to make it easier to weigh out. 

24
00:02:34,680 --> 00:02:40,280
This foam is a four to one ratio,
 so I need four parts of A to one part B.

25
00:02:40,280 --> 00:02:45,960
On average a hand would be between 50
 and 70 grams, depending on the size of it.

26
00:02:45,960 --> 00:02:48,560
And you can always start off
 with a smaller amount

27
00:02:48,560 --> 00:02:51,640
if you're unsure of what you need to use
 just to reduce waste.

28
00:02:51,640 --> 00:02:56,680
And if you need to add more,
 you can add more once the foam is set.

29
00:02:56,680 --> 00:03:00,480
Again just make sure that it's mixed well.

30
00:03:00,480 --> 00:03:07,040
Im going to pour in the foam make sure
 I get it into all the fingers and thumbs,

31
00:03:07,040 --> 00:03:11,120
and then I'll just leave it to expand.

32
00:03:11,120 --> 00:03:16,160
So with this hand, I didn't quite mix up
 enough foam the first time around,

33
00:03:16,160 --> 00:03:21,320
so I'm just mixing up another 25 grams
 to fill it to the wrist.

34
00:03:27,960 --> 00:03:28,960
And there we have it. 

35
00:03:28,960 --> 00:03:36,440
You can see the foam
 just to the top of the wrist.