1
00:00:09,041 --> 00:00:13,250
Today, we're going to use a 70mm bullnose skirting.

2
00:00:13,250 --> 00:00:16,666
It's one of the easiest ones to use.

3
00:00:16,875 --> 00:00:18,833
OK, so we've got a couple of lengths here.

4
00:00:18,833 --> 00:00:22,958
And first of all, I'm going to go to my room,
I've got a piece

5
00:00:22,958 --> 00:00:27,500
across the back wall, I'm going to do this
left hand side piece first.

6
00:00:27,500 --> 00:00:29,708
So I'll just take this length in.

7
00:00:29,708 --> 00:00:31,541
Because I've got to find out the height

8
00:00:32,833 --> 00:00:34,958
for this back piece to make it fit.

9
00:00:36,583 --> 00:00:38,666
I've got to put the piece on the floor.

10
00:00:39,166 --> 00:00:41,708
I've got my knee pads on to protect my knees.

11
00:00:44,666 --> 00:00:46,625
I'm just going to mark off.

12
00:00:47,875 --> 00:00:49,708
Using a little square.

13
00:00:51,083 --> 00:00:53,333
The height I need to cut.

14
00:00:54,250 --> 00:00:56,416
That's a bullnose piece of skirting.

15
00:00:58,041 --> 00:01:00,041
We're going to come back out.

16
00:01:01,583 --> 00:01:02,625
Use the bench over there.

17
00:01:04,833 --> 00:01:08,166
Want to use an off cut of what I've got before.

18
00:01:08,166 --> 00:01:10,375
Because That's the shape
of what I'm going to cut out there.

19
00:01:12,125 --> 00:01:13,916
I'm just going to use this.

20
00:01:16,541 --> 00:01:17,833
To draw around.

21
00:01:19,416 --> 00:01:20,541
Going to cut that out now.

22
00:01:23,625 --> 00:01:26,500
Just going to turn it upside down.

23
00:01:26,500 --> 00:01:29,500
Always cut from the face side.

24
00:01:43,000 --> 00:01:45,541
Just cut down there to the start of the curve

25
00:01:53,750 --> 00:01:56,875
and then use my coping saw to follow the curve round

26
00:01:58,166 --> 00:02:00,916
I'm just going to adjust that blade a little bit

27
00:02:02,041 --> 00:02:03,750
just to make it easier to move the curve.

28
00:02:03,750 --> 00:02:07,541
So long as these two points
line up with each other through there

29
00:02:07,541 --> 00:02:09,000
just using a bit of eyesight.

30
00:02:29,208 --> 00:02:30,916
Just follow that out.

31
00:02:31,708 --> 00:02:33,333
Follow the shape out.

32
00:02:34,750 --> 00:02:37,291
Just check, make sure it fits.

33
00:02:39,958 --> 00:02:42,625
That fits nicely over the top of that.

34
00:02:45,541 --> 00:02:46,833
It follows the shape of it.

35
00:02:48,375 --> 00:02:51,250
So now I'm just going to cut this one to length down this side.

36
00:02:53,000 --> 00:02:54,666
So using my tape measure

37
00:02:56,625 --> 00:02:58,291
to measure down to there.

38
00:03:00,500 --> 00:03:03,375
And I want 2 meters, 262,

39
00:03:04,375 --> 00:03:08,125
just going to cut that off with a square cut.

40
00:03:46,125 --> 00:03:47,250
Now to fit that in

41
00:03:47,250 --> 00:03:49,625
It's just a little bit off the floor,
so what I'm going to use

42
00:03:53,500 --> 00:03:55,583
is a piece of wood,

43
00:03:56,916 --> 00:03:59,500
I'm going to just kneel on that.

44
00:04:03,375 --> 00:04:04,916
If I just put a little bit of weight

45
00:04:06,166 --> 00:04:07,166
on there.

46
00:04:09,041 --> 00:04:11,375
I can get that down nice and tight to the floor

47
00:04:13,166 --> 00:04:15,208
and using a hammer

48
00:04:16,250 --> 00:04:19,208
and my nails. Small little nails.

49
00:04:25,666 --> 00:04:27,625
I can then work myself along the wall

50
00:04:29,291 --> 00:04:31,666
securing that down nice and tight.

51
00:04:42,125 --> 00:04:43,916
And I want to put the nails in about

52
00:04:45,416 --> 00:04:48,750
every 400 to 500 mm apart.

53
00:04:49,500 --> 00:04:52,375
And if you don't want to nail on these days,

54
00:04:52,375 --> 00:04:56,791
a lot of folk tend to use the grip fill or

55
00:04:58,000 --> 00:04:59,791
sticks like.

56
00:05:05,208 --> 00:05:05,916
To fix it,

57
00:05:05,916 --> 00:05:08,125
so you've got no fixings showing at all.

58
00:05:19,208 --> 00:05:21,875
Just using my weight puts it down tight to the floor.