1
00:00:26,960 --> 00:00:29,040
So in this video, I'm going to be applying

2
00:00:29,040 --> 00:00:32,400
one of the silicon prosthetics
that we ran in the previous video.

3
00:00:32,680 --> 00:00:35,440
I'm just going to de-mold this one
to show you the process.

4
00:00:35,520 --> 00:00:37,560
So the silicon is quite sticky.

5
00:00:37,560 --> 00:00:39,600
I'm just going to use
a little bit of powder

6
00:00:40,680 --> 00:00:43,440
just to remove that stickiness,
so it's easier to handle.

7
00:00:46,600 --> 00:00:47,520
And I'm just going to find

8
00:00:47,520 --> 00:00:50,200
one of the edges and gently peel it back.

9
00:00:50,640 --> 00:00:55,120
And then I'm just going to powder
the prosthetic as I go.

10
00:00:55,120 --> 00:00:59,280
So use the power to stop the prosthetic

11
00:00:59,280 --> 00:01:02,840
from sticking back on itself
or any of the areas rolling over.

12
00:01:15,160 --> 00:01:16,160
And there's our piece.

13
00:01:16,160 --> 00:01:19,840
So when I do the application,
this area is called the flashing area,

14
00:01:19,840 --> 00:01:23,640
which is the area which was flood
filled from the mold with silicone.

15
00:01:23,920 --> 00:01:27,640
And then the very thin area next to
it is the cutting edge.

16
00:01:27,640 --> 00:01:31,040
And this is the area
that I'm going to dissolve with a solvent.

17
00:01:31,040 --> 00:01:35,240
This is an acetone based cat plastics
so I'm going to be using some acetone

18
00:01:35,240 --> 00:01:37,800
to dissolve this edge
so it blends in nicely with the skin.

19
00:01:48,240 --> 00:01:50,560
So the first thing I'm going to do
is clean the model's skin.

20
00:01:50,560 --> 00:01:55,000
I'm just using
a little bit of witch hazel.

21
00:01:55,000 --> 00:02:02,280
Okay so now the skin's clean, I'm
just going to outline

22
00:02:02,280 --> 00:02:04,880
where the prosthetics
going to go with some powder.

23
00:02:09,680 --> 00:02:13,920
Just close your eyes.

24
00:02:21,400 --> 00:02:29,560
And then the next thing
that I'm going to do is just take a brush,

25
00:02:29,560 --> 00:02:35,720
I'm going to put into my silicone adhesive
thinner first and then into the silicone

26
00:02:35,720 --> 00:02:39,560
adhesive just so it keeps the adhesive
nice and fluid.

27
00:02:40,040 --> 00:02:43,080
And then I'm just going to place
some in the middle of the area

28
00:02:43,800 --> 00:02:46,360
where I've powered.

29
00:02:46,760 --> 00:02:47,200
I'm not going to go

30
00:02:47,200 --> 00:02:49,720
all the way to the edge,
I just literally want it in the middle,

31
00:02:51,080 --> 00:02:53,720
and I'm going to take.

32
00:02:54,200 --> 00:02:56,960
The piece,
and I'm just going to place that

33
00:02:58,160 --> 00:03:00,360
onto the area and press that down.

34
00:03:05,960 --> 00:03:07,800
And then just using my brush,

35
00:03:07,800 --> 00:03:10,800
I'm going to go just towards the edges.

36
00:03:11,680 --> 00:03:13,480
I'm not going to go
all the way to the edge

37
00:03:13,480 --> 00:03:16,280
because I'm going to use
a different adhesive for the edges.

38
00:04:32,640 --> 00:04:35,400
And the next thing I'm going to do
is just take a small Q-Tip

39
00:04:35,400 --> 00:04:38,160
I'm going to pull some of the excess off
to make it thinner.

40
00:04:38,960 --> 00:04:42,080
And then I'm going to use an acrylic base
adhesive.

41
00:04:42,480 --> 00:04:45,520
So the silicon base adhesive
I used, was silky.

42
00:04:46,160 --> 00:04:48,600
And this one is aqua fix,

43
00:04:53,080 --> 00:04:54,080
and I'm just going to use this

44
00:04:54,080 --> 00:04:56,280
to go around the very edge of the piece.

45
00:04:57,520 --> 00:05:01,040
Now, with the acrylic based adhesives,
you just need to make sure

46
00:05:01,040 --> 00:05:05,200
they're dry and go clear before you try
sticking the prosthetic down.

47
00:05:05,480 --> 00:05:09,120
If it's still that milky, white color
and the adhesive

48
00:05:09,120 --> 00:05:12,320
won't dry underneath
and can cause the piece to lift.

49
00:06:17,160 --> 00:06:17,520
And now

50
00:06:17,520 --> 00:06:20,560
the next thing I'm going to do
is take a brush

51
00:06:20,560 --> 00:06:23,800
with some acetone on it,
because it's acetone that is cat plastic.

52
00:06:24,360 --> 00:06:27,560
I'm also just going to use a cotton pad
as well to make sure that my brush

53
00:06:27,560 --> 00:06:32,240
isn't wet through because I don't want it
dripping onto the model's skin,

54
00:06:34,200 --> 00:06:36,120
and I'm just going to use this to dissolve

55
00:06:36,120 --> 00:06:38,400
the very edges of the prosthetic.

56
00:07:22,040 --> 00:07:23,400
I'm just going to use

57
00:07:23,400 --> 00:07:25,600
a little bit of the acetone
to blend the edges.

58
00:07:37,080 --> 00:07:38,200
And then I'm going to go back

59
00:07:38,200 --> 00:07:41,080
to my acrylic based adhesive

60
00:07:41,480 --> 00:07:44,080
just to then seal those edges

61
00:07:44,640 --> 00:07:47,080
and blend them into the skin.

62
00:08:19,480 --> 00:08:23,240
And then I'm just going to use a make up
sealer fixing spray,

63
00:08:23,280 --> 00:08:24,320
I'm not going to spray it

64
00:08:24,320 --> 00:08:28,600
direct on to the model, I'm
going to spray it into a little pot.

65
00:08:28,600 --> 00:08:33,160
So I'm going to use a brush
just to dip into the fixing spray

66
00:08:34,080 --> 00:08:36,520
and then I'm just going to brush this over
the prosthetic

67
00:08:37,120 --> 00:08:48,560
to seal it.

68
00:08:48,560 --> 00:08:55,960
So to color the prosthetic,
I'm going to use

69
00:08:56,000 --> 00:08:59,120
some alcohol activated makeup,
so I'm going to be using a couple

70
00:08:59,120 --> 00:09:03,000
of flesh tones, which I'm going to flick
on using a toothbrush.

71
00:09:03,560 --> 00:09:07,960
You can use even like stiff brushes,
cut down chip brushes, anything like that.

72
00:09:08,240 --> 00:09:11,080
And I'm also going to be
using some special effects colors as well.

73
00:09:13,000 --> 00:09:14,160
So I'm just going to

74
00:09:14,160 --> 00:09:16,360
speckle on some skin tone.

75
00:09:19,480 --> 00:09:20,920
And when you do this,

76
00:09:20,920 --> 00:09:23,920
especially because I'm working above
the models eye, I'm just going to get her

77
00:09:23,920 --> 00:09:46,520
to close her eyes as well,
so just close your eyes

78
00:09:46,520 --> 00:10:28,120
for me.

79
00:10:28,120 --> 00:10:48,960
So next, I'm going to add some of
the special effects colors into the wound,

80
00:10:48,960 --> 00:10:52,360
I'm going to be using some different red
and blood tones to do

81
00:10:52,360 --> 00:10:53,400
this.

82
00:11:38,240 --> 00:11:40,080
So next, I'm going to apply wound filler,

83
00:11:40,080 --> 00:11:43,160
which is a thick blood, and I'm
going to apply this into the wound.

84
00:11:43,720 --> 00:11:44,480
And after that, I'm

85
00:11:44,480 --> 00:11:48,320
going to apply some congealed blood,
which is some runnier blood.

86
00:11:48,320 --> 00:11:52,480
I've just used my spatula to decant
some of the wound filler on some of it.

87
00:11:52,680 --> 00:11:56,000
And then I'm just going to use my spatula
to put some of this into the wound.

88
00:11:56,840 --> 00:11:59,480
I'm not going to fill the wound
all the way to the top

89
00:11:59,480 --> 00:12:02,280
because I want to create the illusion
of some depth

90
00:12:02,680 --> 00:12:10,440
within there.

91
00:12:10,440 --> 00:12:14,800
And I'm just going to add

92
00:12:14,800 --> 00:12:18,040
a little bit of blood
staining around the edge as well.

93
00:12:32,920 --> 00:12:34,240
So I'm just going

94
00:12:34,240 --> 00:12:36,440
to decant some of the congealed blood

95
00:12:38,120 --> 00:12:41,200
onto my palate,
and then I'm going to use a small brush

96
00:12:41,880 --> 00:12:45,360
to put some of this into the wound.

97
00:12:46,400 --> 00:12:47,600
Close your eyes.

98
00:12:48,440 --> 00:12:52,240
Be very careful when you're working around
the eye area, when using congealed blood

99
00:12:52,240 --> 00:12:55,920
or any kind of runny substances,
that they don't run into the eye,

100
00:12:57,040 --> 00:12:59,480
and I'm just going to use a stipple
sponge to break up

101
00:12:59,480 --> 00:13:03,560
some of the blood around the wound.

102
00:13:03,560 --> 00:13:08,560
Obviously if you cut your head,
one of the things you do is touch it.

103
00:13:08,920 --> 00:13:12,040
So we're going to have some smudged
blood as well.

104
00:13:20,600 --> 00:13:33,440
Just going to lift that back
so we get that bit of detail.

105
00:13:33,480 --> 00:13:37,560
So that's the full process in apllying
a silicon flat piece all the way through,

106
00:13:37,560 --> 00:13:41,040
from sculpting to molding, to running
and then applying the make up as well.

107
00:13:41,280 --> 00:13:43,080
In the next video
we're going to be taking this

108
00:13:43,080 --> 00:13:45,920
a little bit further and adding some
more injuries to the makeup.