1
00:00:09,250 --> 00:00:10,208
Hi, I'm Harriet. 

2
00:00:10,208 --> 00:00:13,416
I teach theatrical level
 three media make up,

3
00:00:13,416 --> 00:00:16,291
and I'm going to show you today
 how to create a slit wrist.

4
00:00:22,166 --> 00:00:24,708
OK, so first of all, sanitize your hands,

5
00:00:25,791 --> 00:00:27,791
make sure that your model
 is sat comfortably.

6
00:00:31,625 --> 00:00:33,458
So the first thing you need to do 

7
00:00:33,458 --> 00:00:37,208
is get your model
 to just bend their wrist up

8
00:00:37,875 --> 00:00:42,666
and then it will be this area
 that you're going to apply your product.

9
00:00:42,666 --> 00:00:46,375
To start with, you need to use Spirit Gum

10
00:00:48,541 --> 00:00:51,041
and you're going to apply that onto

11
00:00:52,541 --> 00:00:54,500
your model's skin, 

12
00:00:55,041 --> 00:00:57,875
as this will help the cinewax

13
00:00:58,416 --> 00:01:00,375
to adhere to the skin properly. 

14
00:01:01,291 --> 00:01:03,375
Make sure you clean your brush 

15
00:01:04,541 --> 00:01:06,125
with surgical spirit 

16
00:01:06,833 --> 00:01:09,250
so you don't cross contaminate. 

17
00:01:12,708 --> 00:01:13,833
Next, 

18
00:01:15,958 --> 00:01:18,291
remove cinewax. 

19
00:01:21,708 --> 00:01:23,500
Don't need a huge amount 

20
00:01:25,041 --> 00:01:28,083
you need sort of like a pea
 size, maybe a little bit larger

21
00:01:29,291 --> 00:01:31,333
while you're working the wax. 

22
00:01:31,958 --> 00:01:34,458
You might feel some hard bits 

23
00:01:35,791 --> 00:01:36,333
in the wax. 

24
00:01:36,333 --> 00:01:39,375
You just need to work it with your fingers
 to soften the wax

25
00:01:39,375 --> 00:01:40,958
so you can't feel any lumps. 

26
00:01:40,958 --> 00:01:44,583
And then it would be easy
 to mold onto your model skin.

27
00:01:46,166 --> 00:01:48,666
Before you apply the wax,
 you need to make sure

28
00:01:49,250 --> 00:01:54,750
that the spirit gum has set enough for you to apply.

29
00:01:55,083 --> 00:01:57,541
So with your ring finger, 

30
00:01:57,541 --> 00:01:59,958
just go across the wax

31
00:01:59,958 --> 00:02:02,458
and it should be stringy in texture.

32
00:02:04,333 --> 00:02:06,625
Apply the sausage shape

33
00:02:07,500 --> 00:02:09,708
onto the spirit gum. 

34
00:02:14,166 --> 00:02:17,041
And then with the flatter
 end of your spatula,

35
00:02:17,791 --> 00:02:19,833
you're then going to 

36
00:02:21,083 --> 00:02:22,833
gently move 

37
00:02:24,375 --> 00:02:25,916
the wax 

38
00:02:27,041 --> 00:02:29,375
down your model's skin. 

39
00:02:38,833 --> 00:02:43,125
Once you've done one  side, you
 then work the wax on the other side,

40
00:02:43,541 --> 00:02:45,500
so you have almost
 like a ridge in the middle 

41
00:02:45,500 --> 00:02:47,791
because that's
 where your cut is going to be 

42
00:02:47,791 --> 00:02:51,583
and then you're going to blend the wax
 into the skin, so it disappears.

43
00:02:52,125 --> 00:02:52,750
So you have

44
00:02:54,166 --> 00:02:56,166
a transparent effect. 

45
00:03:20,375 --> 00:03:23,208
Any excess wax can be scraped off

46
00:03:24,333 --> 00:03:26,291
and just put that
 on the back of your hand or 

47
00:03:26,291 --> 00:03:28,083
put it back onto your pallette 

48
00:03:30,541 --> 00:03:33,666
because it's come in contact
 with your model skin.

49
00:03:33,666 --> 00:03:39,625
Don't put it back into your cinewax tub
 because of cross-contamination.

50
00:03:40,416 --> 00:03:42,666
So once that's moved over. 

51
00:03:50,000 --> 00:03:51,625
And you've got it how you want it. 

52
00:03:55,833 --> 00:03:58,708
You will then be ready to do the cut. 

53
00:04:02,041 --> 00:04:06,833
So if you turn  your spatula around,
 you'll have a slightly sharper edge,

54
00:04:06,833 --> 00:04:10,541
just pull the skin taut
 and then you're going to drag

55
00:04:12,250 --> 00:04:14,041
the point through the cut. 

56
00:04:14,666 --> 00:04:17,375
Just check with your model
 that you're not going too hard

57
00:04:17,375 --> 00:04:22,125
or too deep into the skin
 and then you've got your slice.

58
00:04:23,250 --> 00:04:25,583
Now you're going to use

59
00:04:25,583 --> 00:04:28,750
a burgundy grease paint,

60
00:04:29,708 --> 00:04:30,333
and you're just going 

61
00:04:30,333 --> 00:04:32,416
to put that into the incision

62
00:04:33,375 --> 00:04:35,541
to create a bit of depth. 

63
00:04:59,541 --> 00:05:05,875
Because you're putting  your brush back into the grease paint,
 you can then wipe it over

64
00:05:06,291 --> 00:05:09,875
with surgical spirit afterwards
 so it will kill any bacteria.

65
00:05:12,416 --> 00:05:14,708
OK, so once you've done that,

66
00:05:14,708 --> 00:05:16,875
you're then ready to apply the blood.

67
00:05:27,916 --> 00:05:31,750
So just put a little bit
 into your pallette. 

68
00:05:40,625 --> 00:05:43,000
And then with your brush, 

69
00:05:43,000 --> 00:05:47,583
you're then going to put some blood into the cut.

70
00:05:49,000 --> 00:05:54,458
And then as time goes  on, you can experiment with
the size of the cuts that you use

71
00:05:55,791 --> 00:05:57,458
and where on the body
 you're going to use them 

72
00:05:57,458 --> 00:06:01,000
whether it's on the face
 or anywhere else on your body.

73
00:06:14,375 --> 00:06:17,541
So this is Krayolan
 and it's a transparent blood.

74
00:06:17,750 --> 00:06:19,583
So it's the dark blood. 

75
00:06:19,583 --> 00:06:22,458
So if you get your model
 then to turn their wrist, you'll

76
00:06:22,458 --> 00:06:24,333
then have the blood drip. 

77
00:06:24,333 --> 00:06:27,000
Hopefully; I'll put a bit more on.

78
00:06:27,833 --> 00:06:29,458
It'll start to drip.

79
00:06:30,750 --> 00:06:32,750
And that's how you create a slit wrist.